
Materials
Sfera di Luce PCA is made by thermoforming top quality non-regenerated, self-extinguishing, UV-protected alveolar polycarbonate (PCA) sheets in thicknesses of 16mm, 20mm and 25mm.
The Sfera di Luce skylight is composed of two main elements: the dome, made from top quality polycarbonate sheets, and the base, made from pressed sheet metal or fibreglass.
DOME IN PCA
FIXING SYSTEM
Type of dome
The most suitable dome for your needs:

Square

Rectangular

Circular
COLOURS
Sfera di Luce PCA can be made in opal and transparent colours
OPAL
TRANSPARENT
Thermal insulation
SFERA DI LUCE PCA can be made with alveolar polycarbonate in thicknesses of 16mm, 20mm and 25mm with substantial differences in terms of thermal insulation.
Dome adaptation
Examples of dome adaptation to various types of border
BASES
SHEET METAL BASES
The base is made from pressed sheet metal (galvanised – prepainted – stainless steel – printed RAL on request with a standard thickness of 12/10mm).
Its height can be customised according to the needs of the site and the lower lip support is made according to the type of covering to be adapted to. The base can be supplied as a single wall or insulated with a self-extinguishing polystyrene panel with a thickness of 4cm adapted to be sheathed, by the customer, or coupled to an external galvanised sheet of a thickness of 8/10mm to be connected to the covering. The thickness and type of insulation are also customisable aspects.
- Made to measure
- Adaptable to any covering
- Insulation on request.
FIBREGLASS BASES
The base is made from resin and layers of fibreglass with a grammage of 450g/m² and protrudes from the covering for at least 20cm with truncated pyramid shape, with a top edge of 5cm to support the dome/frame and shaped at the foot to pair with the sheets used in the covering. The base can be supplied as a single wall or insulated using an expanded polyurethane panel with a density of 35kg/mc and a thickness of 20mm, which is coated with a 450g/m² layer of fibreglass.
- Easy to install
- Made with pre-forming moulds
- Made in small sizes
- Insulation on request

NETS
FALL PROTECTION NET
The electrowelded fall protection net can be installed above or below the base and comes with triple selvedge at the ends with horizontal and vertical wires, both linear, made from galvanised steel with a diameter of 2.0mm and 100x50mm mesh. This net is drop test certified (drop weight 50kg, drop height 1,200mm).
ANTI-INTRUSION NET ACCORDING TO ANIA REGULATIONS
The electrowelded galvanised anti-intrusion net can be installed above or below the base and can be produced with round bar, 15mm in diameter and 180x500mm mesh.