- Reduces the need for artificial lights, meaning significant energy-saving.
- Thermal performance criteria are met with the addition of the canopy
- Suitable for large spaces, shopping centres, hospitals and airports
- It is normally used for flat or slightly sloping roofs
- Light is spread evenly, with no direct sun radiation.
- Designed for quick installation
- No maintenante, self-cleaning

IN SOLID SHOCK-PROOF POLYCARBONATE
onda di luce PC
Materials
Onda di Luce is made by thermoforming top quality non-regenerated, self-extinguishing, UV-protected, shock-proof polycarbonate (PC) sheets.
Onda di Luce is a complete skylight is composed of two main elements: the continuous skylight, made from top quality polycarbonate sheets, and the base, made from pressed sheet metal.
SHOK-PROOF COVER IN PC
ANTIURTO

Type of skylight
Section modules:
Rectangular
COLOURS
Onda di Luce PC can be made in opal and transparent colours
OPAL
TRANSPARENT
Thermal insulation
ONDA DI LUCE PC can be made with single, double or triple wall with substantial differences in terms of thermal insulation.
Dome adaptation
Examples of dome adaptation to various types of border

THERMAL TRANSMITTANCE
Thermal transmittance is the transmission of heat that occurs through a body when it is subject to a difference in temperature, therefore representing the thermal flow per surface area unit that passes through a technical element (skylight) which separates two environments where air temperature has a unit difference.
According to (Italian) Legislative Decree 311/06 and (Italian) Presidential Decree 59/09, Italy has been divided into 6 climate areas subject to different thermal transmission values, to reach greater energy efficiency.




SHEET METAL BASES
The base is made from pressed sheet metal (galvanised – prepainted – stainless steel – printed RAL on request with a standard thickness of 12/10mm).
Its height can be customised according to the needs of the site and the lower lip support is made according to the type of covering to be adapted to. The base can be supplied as a single wall or insulated with a self-extinguishing polystyrene panel with a thickness of 4cm adapted to be sheathed, by the customer, or coupled to an external galvanised sheet of a thickness of 8/10mm to be connected to the covering. The thickness and type of insulation are also customisable aspects.

- Made to measure
- Adaptable to any covering
- Insulation on request.




Nets
FALL PROTECTION NET
The electrowelded fall protection net can be installed above or below the base and comes with triple selvedge at the ends with horizontal and vertical wires, both linear, made from galvanised steel with a diameter of 2.0mm and 100x50mm mesh.
This net is drop test certified (drop weight 50kg, drop height 1,200mm).
ANTI-INTRUSION NET ACCORDING TO ANIA REGULATIONS
The electrowelded galvanised anti-intrusion net can be installed above or below the base and can be produced with round bar, 15mm in diameter and 180x500mm mesh.