Rectangular
OPENABLE DOME IN SOLID POLYCARBONATE
sfera daria PC

PLUS
- Aluminium frame with profiles designed by us
- Frame with high torsional resistance
- Electronically / manually openable and for access to the cover
- Can be opened with one or more push points for greater strength and stability
- Built-in end stops
- Adjustable opening
- Thermal performance criteria are met with the addition of the skylight
- 24V or 220V motors
- Frame with drip tray/li>
- Fixing of motor supports without drilling into the frame

MATERIALS
Sfera Daria PC is made by thermoforming top quality non-regenerated, self-extinguishing, UV-protected alveolar polycarbonate (PC) sheets in thicknesses of 16mm, 20mm and 25mm.
TYPE OF DOME
The most suitable dome for your needs

Square


Circular
COLOURS
Sfera Daria PCA can be made in opal and transparent colours
OPAL
TRANSPARENT
Thermal insulation
SFERA DARIA PC can be made with polycarbonate in thicknesses of 16mm, 20mm and 25mm with substantial differences in terms of thermal insulation.
Dome adaptation
Examples of dome adaptation to various types of border

OPENABLE FRAME
The openable frame allows the skylight to be opened and the room to be naturally ventilated. It is made from two frames (fixed and openable) in natural extruded aluminium alloy 6060, joined together by means of aluminium hinges with steel pins. There is an EPDM gasket between the two frames. The frame can be opened by means of an electric motor.

OPENABLE FRAME

ELECTRICAL OPENING
170mm – 300mm stroke

ELECTRICAL OPENING
300mm – 550mm stroke

MANLID OPENING





THERMAL TRANSMITTANCE
Thermal transmittance is the transmission of heat that occurs through a body when it is subject to a difference in temperature, therefore representing the thermal flow per surface area unit that passes through a technical element (skylight) which separates two environments where air temperature has a unit difference. According to (Italian) Legislative Decree 311/06 and (Italian) Presidential Decree 59/09, Italy has been divided into 6 climate areas subject to different thermal transmission values, to reach greater energy efficiency.



BASES
SHEET METAL BASES
The base is made from pressed sheet metal (galvanised – prepainted – stainless steel – printed RAL on request with a standard thickness of 12/10mm).Its height can be customised according to the needs of the site and the lower lip support is made according to the type of covering to be adapted to. The base can be supplied as a single wall or insulated with a self-extinguishing polystyrene panel with a thickness of 4cm adapted to be sheathed, by the customer, or coupled to an external galvanised sheet of a thickness of 8/10mm to be connected to the covering. The thickness and type of insulation are also customisable aspects.
- Made to measure
- Adaptable to any covering
- Insulation on request.
FIBREGLASS BASES
The base is made from resin and layers of fibreglass with a grammage of 450g/m² and protrudes from the covering for at least 20cm with truncated pyramid shape, with a top edge of 5cm to support the dome/frame and shaped at the foot to pair with the sheets used in the covering. The base can be supplied as a single wall or insulated using an expanded polyurethane panel with a density of 35kg/mc and a thickness of 20mm, which is coated with a 450g/m² layer of fibreglass.
- Made to measure
- Adaptable to any covering
- Made in small sizes
- Insulation on request

NETS
FALL PROTECTION NET
This net is drop test certified (drop weight 50kg, drop height 1,200mm).
ANTI-INTRUSION NET ACCORDING TO ANIA REGULATIONS
The electrowelded galvanised anti-intrusion net can be installed above or below the base and can be produced with round bar, 15mm in diameter and 180x500mm mesh.
MOSQUITO NET
The mosquito net is made from fibreglass and has a perimeter frame for proper installation.
ANTI-BIRD NET
The anti-bird net is made with 2mm diameter thread, galvanised and coated in green PVC, with 10x10mm mesh. It can be installed above or below the base to prevent the intrusion of birds.
