OPENABLE SKYLIGHT IN ALVEOLAR POLYCARBONATE (PCA)

onda daria pca

Onda Daria is a skylight that can be fixed or openable and is composed of 3 main elements:

  • The dome is made from top quality polycarbonate sheets.
  • The opening frame is made from natural extruded aluminium alloy 6060.
  • The base is made from pressed sheet metal or fibreglass.
Durability over time
Hail resistance
Ageing and yellowing
Specific weight
Aesthetic impact

PLUS

  • Aluminium frame with profiles designed by us
  • Frame with high torsional resistance
  • Skylight electronically / manually openable and for access to the cover
  • Can be opened with one or more push points for greater strength and stability
  • Built-in end stops
  • Adjustable opening
  • 24V or 220V motors
  • Frame with drip tray
  • Fixing of motor supports without drilling into the frame

MATERIALS

Onda Daria is made by thermoforming top quality non-regenerated, self-extinguishing, UV-protected alveolar polycarbonate (PCA) sheets.

Onda Daria is a complete skylight is composed of two main elements: the continuous skylight, made from top quality polycarbonate sheets, and the base, made from pressed sheet metal.

TYPE OF SKYLIGHT

Rectangular

COVER IN PCA

FIXING SYSTEM

COLOURS

OPAL

TRANSPARENT

Thermal insulation

ONDA DARIA PCA can be made with alveolar polycarbonate in thicknesses of 16mm, 20mm and 25mm with substantial differences in terms of thermal insulation.

Dome adaptation

Examples of dome adaptation to various types of border

OPENABLE FRAME

Il telaio apribile permette l’apertura del lucernario consentendo e favorendo l’aerazione naturale dell’ambiente. E’ realizzato de ude telai (fisso e apribile) in alluminio estruso naturale lega 6060 unti tra loro per mezzo di cerniere in alluminio con perni in acciaio. Trai due telai è interposta una guarnizione in EPDM . L’apertura del telaio puo’ avvenire tramite motore elettrico.

SOLUTION DESIGNED FOR GREATER WIND RESISTANCE

MAXIMUM ADAPTABILITY COMPARED TO TRADITIONAL SOLUTIONS

HOLE SIZE

SHEET METAL BASES

The base is made from pressed sheet metal (galvanised – prepainted – stainless steel – printed RAL on request with a standard thickness of 12/10mm).
Its height can be customised according to the needs of the site and the lower lip support is made according to the type of covering to be adapted to. The base can be supplied as a single wall or insulated with a self-extinguishing polystyrene panel with a thickness of 4cm adapted to be sheathed, by the customer, or coupled to an external galvanised sheet of a thickness of 8/10mm to be connected to the covering. The thickness and type of insulation are also customisable aspects.

  • Made to measure
  • Adaptable to any covering
  • Made in small sizes
  • Insulation on request

NETS

FALL PROTECTION NET

The electrowelded fall protection net can be installed above or below
the base and comes with triple selvedge at the ends with horizontal and vertical wires, both linear, made from galvanised steel with a diameter of 2.0mm and 100x50mm mesh.
This net is drop test certified (drop weight 50kg, drop height 1,200mm).

ANTI-INTRUSION NET ACCORDING TO ANIA REGULATIONS

The electrowelded galvanised anti-intrusion net can be installed above or below the base and can be produced with round bar, 15mm in diameter and 180x500mm mesh.

MOSQUITO NET

The mosquito net is made from fibreglass and has a perimeter frame for proper installation.

ANTI-BIRD NET

The anti-bird net is made with 2mm diameter thread, galvanised and coated in green PVC, with 10x10mm mesh. It can be installed above or below the base to prevent the intrusion of birds.

Materials

Need more insights on
ONDA DARIA PCA?